# Bitbucket Webhook Response 308

**URL:** <https://drone.discourse.group/t/bitbucket-webhook-response-308/5141>\
**Category:** Drone Support\
**Created:** [November 16, 2020, 7:44pm UTC](https://drone.discourse.group/t/bitbucket-webhook-response-308/5141 "2020-11-16T19:44:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Joaquin\_Cardenas](https://yyz1.discourse-cdn.com/flex003/user_avatar/drone.discourse.group/joaquin_cardenas/32/2883_2.png) [@Joaquin\_Cardenas](https://drone.discourse.group/u/Joaquin_Cardenas)\
**Post date:** [November 16, 2020, 7:44pm UTC](https://drone.discourse.group/t/bitbucket-webhook-response-308/5141/1 "2020-11-16T19:44:17Z")

</div>

hitting the webhook via bitbucket on a repo push  
[http://drone.tools.almacenguru.cl/hook?secret=6xmaAcObuIzK5riz4IJLpO9TICHNn6jR](http://drone.tools.almacenguru.cl/hook?secret=6xmaAcObuIzK5riz4IJLpO9TICHNn6jR)

Delivers the following response

 ![Screen Shot 2020-11-16 at 16.31.54](https://canada1.discourse-cdn.com/flex003/uploads/testdrone/original/2X/2/23f80ddbe679c6dd278e0edead7e1578523a8b59.png)

No activity is shown on the drone, despite that is “kinda activated”

 ![Screen Shot 2020-11-16 at 16.41.31](https://canada1.discourse-cdn.com/flex003/uploads/testdrone/original/2X/f/f0753497be88d8ed3ffa374d663ee6ddf6a31d0f.png)

---

<div class="post-metadata">

**Author:** ![bradrydzewski](https://yyz1.discourse-cdn.com/flex003/user_avatar/drone.discourse.group/bradrydzewski/32/3513_2.png) [@bradrydzewski](https://drone.discourse.group/u/bradrydzewski)\
**Post date:** [November 16, 2020, 8:25pm UTC](https://drone.discourse.group/t/bitbucket-webhook-response-308/5141/2 "2020-11-16T20:25:01Z")

</div>

Drone does not use the 308 status code, so if you receive a 308 status code, it must be coming from somewhere else such as a reverse proxy. You may want to check the reverse proxy configuration to ensure it is setup properly.

Also, do you have the proxy configured for SSL termination? I can see your webhook uses an http address, in which case this could result in an http to https redirect. If Drone has an https address you need to make sure you configure Drone accordingly [https://docs.drone.io/server/reference/drone-server-proto/](https://docs.drone.io/server/reference/drone-server-proto/)